INDEX MS22C 

Mfd. 2015
Index control C200-SL with single NCU
 

Machine control panel equipped with a flat screen 47 cm

Carriage unit 1.1
X-axis and Z-axis NC controlled
Slide unit 1.2X axis rigid, Z axis NC controlled
Slide unit 2.1X axis rigid, Z axis NC controlled
Carriage unit 2.2
X-axis and Z-axis NC-controlled slide unit 3.1
X-axis and Z-axis NC-controlled slide unit 3.2X-axis NC controlled, Z-axis manually adjustable on X-axis and Z-axis NC-controlled slide unit 4.1
X axis and Z axis NC controlled slide unit 4.2X axis NC controlled, Z axis manually adjustable on X axis and Z axis NC controlled

Carriage unit 5.1
X axis and Z axis NC controlled slide unit 5.2X axis NC controlled, Z axis manually adjustable on X axis and Z axis NC controlled
Carriage unit 6.1
Swivel axis and Z-axis NC controlled

UNIMAG – Interface for connecting a bar loading magazine
 

Synchronizing device Position 6.1 with workpiece ejection device and preparation for coolant supply through the synchronous spindle

Hainbuch Spanntop Axfix D22 for synchronous spindle

Rear processing device on slide position 6.2 for max. three drill holder pieces fixed tools

Oil/air lubrication for tool holders for one to a maximum of six units

Electrical preparation for an additional drive with an electronic shaft
(position-synchronous operation to the main and counter spindle)
Can be used for all additional drives with incremental encoders. single module

Electrical preparation for an additional drive without an electronic shaft, only speed-controlled. single module

High-frequency spindle with accessories (SycoTec)
 

Hinged belt chip conveyor 800 mm discharge height

Cooling lubricant tank, capacity 800 liters

Vacuum rotation filter, capacity 650 liters
Heat exchanger pump 80 litres/min 7 bar low pressure pump 300 litres/min 4 bar high pressure pump 55 litres/min 40 bar

IEMCA SIR MS22/33/P area loader, bar length 3300 mm

fire extinguishing system

oil suction

cooling unit